As we explained in the entry "Fertilizer spreader: what it is and what it is for", the spreaders They are a hermetically closed tank that is used for irrigation.
In these fertilizers you can introduce the different fertilizers or products to be dosed. These fertilizers will be applied on our orchards or gardens providing the necessary nutrients.
Table of Contents
Parts of a spreader
Our fertilizer spreaders have three intakes, one for the water inlet, another for the outlet of the water dosed with fertilizer and another for evacuation. They are connected to the irrigation network in close but isolated points. This separation is limited by a valve that generates a pressure difference so that part of the irrigation water can circulate through the tank.
The water enters the tank tangentially to the wall from the bottom. The water joins with the compost that was previously introduced into the tank. In this way, the solution comes out of the upper part of the tank. The irrigation network is thus supplied with the solution.
The spreaders do not require agitators or stirrers. This is due to the fact that the mixture of fertilizers is carried out in the tank itself with the dissolution of the water in the tank.
When starting the spreader, it is advisable to leave the lid completely open. With the machine's own pressure, it will close.
Characteristics of the fertilizers.
All our spreaders have special characteristics that make them the most competent in the sector, they are the following:
- Made of laminated polyester reinforced GRP
- Lid with metal accessories painted in epoxy
- Polyester support base, RM 3/4" PVC crepes
- Viton crespine gaskets.
- Working pressure 5 bar
- Maximum pressure 6 bar
Spreader capacity
Although our spreaders have very similar characteristics, there is a very important fact that makes them different, the capacity.
In our Flamenco skirts category spreaders you can find with different capacities and dimensions.
25 liter fertilizer spreader
- Diameter 420mm
- 370mm height
- Diameter 420mm
- 600mm height
- Diameter 420mm
- 790mm height
- Diameter 470mm
- 800mm height
- Diameter 520mm
- 920mm height
- Diameter 660mm
- 980mm height
In the same section you can also find a spreader kit which includes all the necessary items to carry out the installation and start-up of your spreader, and remember that we are a specialist in manometer, irrigation programmer, irrigation controller accessory and in drip irrigation online store.
Leave your comment