Kit for installation of Venturi injector in irrigation with models of 3mm, 5mm and 7mm pitch from the manufacturer Vicamp.
Materials included in this Kit:
- 1 Venturi injector (3mm, 5mm or 7mm pitch).
- 2 reinforced simple outlet collars 3/4" (32mm, 40mm, 50mm or 63mm) for flexible tubing.
- 2 PP male thread terminals 3/4"-ø25mm for flexible tubing.
- 5 meters of 25mm flexible PVC pipe.
- 2 reinforced single outlet collars 1/2" (32mm, 40mm, 50mm or 63mm) for pressure gauges.
- 2 tefen reduction nuts 1/2"- 1/4" for pressure gauges.
- 2 manometers 0-6bar glycerin.
- 2 ball valves (PE-PE and RH-RH) to exchange the outlets and make them mixed.
- 2 PP extension nuts RM 3/4"- RH 1" (only for the 7mm Venturi injector).
- 1 Teflon PTFE roll 12mmx0,1mmx12m.
Fertilizer venturi injector, with flow meter and precision dosing key.
The venturi injector with flow meter has the great advantage of being able to introduce the desired amount of fertilizer to the irrigation network. Its indicator, in liters per hour, of the flowmeter or flowmeter, allows us to measure or precisely dose the amount of fertilizer desired to the irrigation network.
It does not need maintenance.
It works without any type of energy, only with the pressure of the irrigation network.
El venturi effect It consists of increasing the speed of the fluid by decreasing a section of the network through which the fluid circulates.
Maximum Working Pressure: 8 Kg / cm2
Minimum Working Pressure: 1 Kg / cm2
Its installation is simple, and it can be used in series on the network (for small flows), or in parallel, forming a ''BY-PASS'' for large irrigation flows.
Includes 1,5 meters of clear tubing and a Venturi foot filter.