Manual ring filter RM 1.1 / 2 long ARKAL.
Ring filters have the ability to filter in depth, so they are indicated for filtering problem waters or when using small pass emitters, such as drip.
The 1.1/2” T-shaped filter made entirely of plastic whose filter element is made up of a set of grooved rings that, mounted on a spine, form a cylindrical filter body. The rings are held together and compressed thanks to the force of a spring located at the bottom of the filter cover.
The filter has straight inlet and outlet connections of 1.1/2'' male thread and is available in two versions: short and long, the latter giving a greater surface area and filtration capacity.
Both versions have a water pressure reading before and after the filter. The available filtration grades 40,80,120,140, 200, XNUMX, XNUMX and XNUMX mesh, allow its use in multiple applications such as: sprinkler, micro-sprinkler and drip irrigation installations, greenhouses, domestic or industrial water circuits, filtration of water intakes for hydraulic control systems ,etc...
Cleaning is easily done manually, by removing the cap and removing the ring cartridge that will be washed with clean water under pressure.
Makings:
-Body, cover and spine: polyamide reinforced with fiberglass.
-Rings: polypropylene.
-Spring: stainless steel.
-O-rings: nitrile rubber.
Features:
-Maximum pressure 10 atm
-Flow 12 m3 / h
-Filtration surface 501,8 cm2
-Filtration volume 592 cm2
-Filter length 350 mm
-Filter width 130 mm
-Distance between connections 200 mm
-Length of filter elements 228,3 mm
-Weight 1,51 kg
-Filtration degree 140 mesh 100 microns (BLACK)
-Maximum head loss 3 mcaa 6 m12/h (3 mesh)
