Agrónic 2518 programmer, with 18 configurable outputs, with 220V power supply and 24V, AC output, flush mount.
The Agrónic 2500 is a complete controller for fertigation, fully configurable and with multiple possibilities of use, communication and expansion.
Equipped to control irrigation, fertilization, pumping and filter cleaning, with fault detection and detailed chronological record of events and accumulated history.
Models with 9, 18 and 27 configurable outputs, plus 6 digital inputs on the base, as well as various versions and options.
Expansions for reading 2 analog sensors at the base or through the AgroBee radio system for more inputs and outputs, until reaching the limits of 30 irrigation sectors, 2 motors, 4 fertilizers and agitators, 1 general fertilizer, 9 filters, 1 general filter, 20 digital sensors, 10 counter sensors and 10 analog sensors.
Programming by time and volume, both in irrigation and fertilization and in filter cleaning, with the possibility of independent actions in each program.
By means of climatic or cultivation sensors, the starting conditions or the irrigation and fertilizer units can be influenced.
Remote management via SMS messages, as well as a link to a PC for three users or to the Irrigation Community program.
Fully scalable from the basic model, with great ease of use, to adding all the options to reach a high-performance model.
IRRIGATION:
It controls up to 30 irrigation sectors governed by 50 independent programs, with the corresponding extensions, and the possibility of linking programs to carry out irrigation sequences.
Each program can simultaneously activate 1 to 4 irrigation sectors. You can limit the simultaneous action of sectors, from 1 to 8 between several programs.
Each program can start its performance at a specific time, choosing the days of the week, at the end of another program or by an entry when closing a contact. Optionally, also when a sensor reaches a certain value (° C, soil water content, etc.), by mobile phone via SMS message, by irrigation frequency (water every day, every 2 days, every 3 days, etc. .) or water every day with several activations. You can also indicate the period of the year in which it should be operational. Initially, by means of sensors, an active schedule and a margin of time between starts can be selected.
Irrigation units in time (hh: mm), in volume (m3) and, optionally, per hectare volume (m3 / ha), independent by program. Units of time limit in the application by volume.
Proportional distribution of each meter pulse into the accumulated and historical ones, according to the expected flow of the sectors related to the meter that irrigate at the same time.
Optionally, modification of the irrigation and fertilization units by sensors that will influence depending on their values from the previous irrigation, such as rain, evapotranspiration, integration of solar radiation, etc. or by means of a virtual sensor (manual command or by SMS) to modify the irrigation units of all the programs at the same time.
FERTILIZATION:
Configurable from 0 to 4 fertilizers, in independent tanks.
Independent pre-irrigation and post-irrigation values for each program.
Fertilization units in time (hh: mm), in volume (L) and, optionally, per hectare volume (L / ha).
Configurable the use or not of the agitators, with pre-agitation and intermittent or followed agitation.
Fertilizers can be applied in three different ways:
-In series: one type of fertilizer after another, with a single injector.
-Parallel: simultaneous several fertilizers at the same time, with an injector for each one.
-Uniform (optional): apply the fertilizers with a uniform distribution of each of them between pre and post irrigation. Parallel application.
In volume sensors, optionally detection of lack of pulses or water leakage. Proportional distribution of each meter pulse in the accumulated and historical ones according to the expected flow of the sectors that fertilize at the same time.
PUMPING:
It has 1 to 2 general irrigation outputs, or motors, with assignment of the sectors that will activate them, and independent activation and deactivation timings. Timing for the entry and exit of each of the sectors.
Optionally, control of a diesel engine or generator set, with outputs for start, stop, contact and pre-heating. Control of the start and stop of the electric pump. Fault detection.
WARRANTY:
The Agrónic 2500 complies with the CE marking directives.
The products manufactured by PROGRÉS enjoy a two-year guarantee against any manufacturing defect.
