Maintaining swimming pools at home is essential to be able to enjoy our pool and have a good time with the family, on weekends or when the summer season arrives. Therefore, we tell you best tips for keep the water in your pool in optimal conditions, without having any problem when using this space.
Table of Contents
Learn the best tips to keep your pool clean
With these valuable contributions, you will be able to enjoy with your loved ones a wonderful sunny day, together with a sparkling pool, completely cleaned with completely clean water.
Next, we indicate the tips for maintaining the water in your pool, free of residues:
-Check the water chemistry, essential for pool maintenance
The correct amount of pH is essential for pool maintenance. This component should range from 7.2 to 7.4.
On the other hand, if the levels exceed those established, it means that it does not have the optimal properties to take care of the water.
To maintain the water in your pool, it is advisable to check the pH twice a week, during the summer and at least once a week in the winter.
-Attentive with the high level of Ph
Avoid keeping your pool at a high pH level. Adjust the pH level to the indicated one, to avoid inconveniences to bathers. In other words, such an imbalance in this chemical compound can cause allergic reactions to both the skin and the eyes.
-Check the skimmer baskets
The main function of skimmer baskets is to absorb debris and contaminants before they make contact with the pool floor or float to the surface.
The greater the effectiveness of the baskets, the same amount of waste you can collect, keeping your pool in good condition.
-Keep the pump pre-filter clean.
It is located in the pool filter pump. You can perform this procedure every two weeks.
-Upgrade your water pump
If your pool pump is old, it can be changed to a variable speed or two-stroke pump. This will allow you to carry out this maintenance work without major problem in your pool.
-Check the pool water level
The water level is of vital importance. Therefore, the water must be just at the level of your baskets or "skimmer" to obtain optimal results in its operation.
If the amount of water that your pool must have is below what is required, this mismatch can cause a failure in the filtration pump, by overexposing it to air entering the filtration circuit.
-Check the ozonator
This device is very important for the maintenance of your pool, since it allows to keep the water free of pathogens. Check its operation, since if there is a bad combination of this tool together with UV rays, which can generate losses in the chlorine levels of the pool.
-Check the chlorine
This compound should be checked regularly. Chlorine tablets have the ability to add chlorine to the pool constantly, in necessary quantities, but we should not overdo it with that component.
-Check the chlorine generator
There are so-called salt or "salty" pools, which have a built-in chlorine generator to produce the appropriate amount of chlorine in the water.
The chlorine generator produces the right amount of chlorine and makes your pool work automatically. Therefore, we must be very careful with the chemical that will be generated in our pool.
-Keep pool filters clean
Filters play an essential role in keeping pool water clean. It allows the pool water to be without residues, makes the most of the water, generates little waste of it and provides good flow rates.
We recommend that you perform its maintenance twice a year.
Tips that help the correct maintenance of the water in your pool
Checking the operation and cleanliness of baskets, filters, pH and water level, guarantee without a doubt, the maximum utility of your pool. Its maintenance should be done at least twice a year. Although, if your pool is used regularly by a large number of people, its maintenance should be carried out more often.
Similarly, clean areas near the pool, since dirt can be dragged into our pool. The main factors are the growth of plant material, waste from birds and domestic animals, as well as the behavior of bathers before entering the pool.
The cleaning and operation of filters and baskets, allows the non-proliferation of algae and fungi that can generate a skin disease in bathers. This usually happens when there are no minimum pool maintenance rules.
Good reasons to cover your pool
There are many reasons why you should cover your pool; although surely in your environment you will hear that it is not necessary to cover the pool.
-Clean Pool
Put a waterproof cover on the pool and you will be protecting it from dust and dirt. Make sure you have a good pool cover, that prevents the fallen leaves of the trees from causing viscosity. Birds and insects can also cause dirt.
You just have to be careful when removing the cover. If you carelessly remove all the dust accumulated on top, it will fall and cause the dirt that we have tried to avoid.
-Economic cover
Apart from adding a touch of decoration to your garden, these waterproof covers are accessible and do not affect your pocket. Find a model that is not only functional but also beautiful, with a focus on quality.
Also, you can find a variety of options, such as wooden planks, artificial grass, and tiles. The pool cover not only protects but also decorates.
-Covering your pool is a safe garden
Safety is an important point for you and your family, especially when there are children in the home. With children and no cover in the pool, you should be vigilant when they are playing around or near the pool.
The pool can be a dangerous place with or without water. So, take your precautions and prevent accidents from happening.
-Easy to clean
A waterproof cover protects the pool from external factors such as rain, sun and wind, which make your pool age. With the waterproof cover this deterioration will be reduced to a minimum.
For this reason, it is a good option for you to invest in pool covers. It not only saves you the expense of painting the entire pool, but also the chemicals necessary for maintenance.
-Save money on pool maintenance
Using a pool cover also helps reduce expenses. Responsible use of water without wasting it is not an easy task. In that sense, it makes sense to use a cover. Let's conclude with that explanation.
Covering the pool when not in use, especially during the hottest hours of the day, will prevent the water from evaporating. As a result, you don't have to keep adding water.
We hope the article has served you. If you have any questions, do not hesitate to contact contact with us. You can also find what you need in our websites.
Leave your comment