Self-cleaning ring filter equipment: applications and advantages

El self-cleaning ring filter equipment It is formed by the union of several synthetic discs located inside the filter, which has a telescopic shape.

This filter is designed to carry out a deep filtration in the water to be used for different purposes.

The self-cleaning ring filtration equipment is usually used in the use of water for localized irrigation, drip, well, river, lake or pond water, processed and cooling.

Table of Contents

How does the self-cleaning ring filtration equipment work?

El self-cleaning ring filter equipment It works in two different ways: filtration process and backwash process.

? Filtration process: The body of the filtering equipment has a telescopic shape, inside which we find disks joined in the shape of a cylinder that form an empty cylinder. These discs are compressed due to the force exerted by the spring and the pressure of the water.

The filtered water will pass through the filter, rising from the centrifugal wing inside the filter, being transferred to the discs through a cyclonic effect.

The main function of the filtration process is to trap and separate suspended particles greater than 130 microns that exist in the water. The particle retention capacity of the ring filtration equipment is quite high.

? Backwash process: As we have said before, the filtration process consists of trapping the suspended particles that the filtered water contains. Therefore, the discs will clog at a certain point due to the retention of these particles.

The backwash process is a fully automatic process that consists of using clean water under pressure to remove all these particles adhering to the discs. All the particles will be eliminated from the interior of each one of the filters in series.

During this process, which lasts approximately 15-20 seconds, the filtration process runs in parallel and does not stop at any time.

Advantages of self-cleaning ring filtration equipment

The self-cleaning ring filtration equipment has multiple advantages that are detailed below:

✅ The filtering system is made up of nylon reinforced polypropylene rings. In this way, it guarantees a long useful life and great resistance to any type of breakage.

✅ Its system of crossed rings guarantees a exhaustive filtration and a high capacity of retention of particles in the water.

✅ It has an autonomous system of carwash which acts when there is a pressure difference between the inlet and outlet of the filter, determining a uniform pressure in the irrigation flow.

✅ The filtration system has a backwash valve, which will evacuate the water automatically, guaranteeing the separation of clean water and wash water.

✅ The filtration process will not be interrupted during the self-wash process. This process only takes 15-20 seconds and does not affect performance.

✅ Easy maintenance and Long duration.

✅ His reinforced body prevents wear and corrosion due to exposure to external factors.

Not only that we also have for you pool cleaning products, urban garden, drippers for urban garden, drip irrigation online store.

Post Author

Sergio Lozano Saura

It may interest you

Sprinkler and micro sprinkler irrigation systems Keep Reading »

Tips for your urban garden: what are the best foods to grow Keep Reading »

Adapt your Water Treatment System to RD 3/2023: Keys and Solutions from AZUD Keep Reading »

What to plant in spring? Keep Reading »

The heat is approaching and with it the time to get our pool ready. In this article we will tell you how to do it so that you anticipate and be ready for when you want to take a refreshing dip in it. Next, we will show you, step by step, how to set up the pool for the summer. First of all, it is important to note that, to follow the next steps, we count on a good maintenance in winter. If so, as much as it may seem to you, setting up your pool will not be expensive at all. 1. Removing the pool cover The first step in setting up the pool is to remove the pool cover, clean it thoroughly and allow it to air dry. For safety, as well as to avoid losses due to evaporation and accumulation of dirt, it is important that we continue to use it until the summer season arrives. 2. Cleaning the pool filters The pool filters are one of the key parts of the pool, so yes or yes, they must be cleaned properly. This is done with suitable chemicals. You also have to check the sand taking into account that if it is more than three years old, it must be changed. 3. Cleaning the tank and the elements that are integrated into it Another crucial part to check when setting up the pool is the tank and all the components that are integrated such as the baskets, the grid, the skimmers or the overflow channel. It is recommended to clean them with high pressure water. Cleaning the surface of the glass is recommended to be done in a non-aggressive way. For example, sponges or brushes are strongly discouraged. What is recommended to do to help the cleaning go smoothly is to use suitable descaling products. If you have underwater lighting fixtures, it's time to check them out. 4. Cleaning the bottom of the pool You can use a robot cleaner for this, although the pool must have at least 40 centimeters of water. Take advantage of this moment to check the trampolines, levers or stairs, that is, if they are in perfect condition. If so, you just have to clean them. 5. Fill the pool It is time to fill the pool with water. Once you do, a shock treatment is recommended to eliminate germs, bacteria and other contaminating residues with the idea of doing preventive work and avoiding the development of microorganisms that can generate bad odors or be harmful to the skin. Lastly, check the pH of the water. It has to be between 7,2 and 7,6. To settle accounts with products on the market that will help you reduce or increase it according to what you need. If you have followed these tips, your pool will be more than ready to face the summer and to welcome you when you want to cool off. As you can see, it is not a complicated process. The key is that we maintain good maintenance throughout the year. You can find the items you need for the maintenance of your swimming pool in our online store www.mundoriego.es, specifically in its swimming pools section.

Setting up the pool for the summer Keep Reading »

Advantages of manual ring and mesh filters Keep Reading »

Everything you need to know about irrigation valves: what they are, types and what each of them is used for Keep Reading »

Greenhouses and irrigation systems Keep Reading »

PP fittings for polyethylene (PE) Keep Reading »

How to automate watering in gardens Keep Reading »

One reply to "Self-cleaning ring filter equipment: applications and benefits"

JOSE A. SIRVENT says:

19 June 2020 the 5: 35 pm

Thanks for your email and information
My interest is for African countries with which I am well positioned and introduced, at the moment I have their filters in consideration for Uganda and Senegal, where I will soon travel again

Reply