5-stage domestic osmosis equipment without a pump and with manual flushing, which cleans the osmosis membrane to extend its useful life.
Operating regime: minimum pressure 2,5 bar - maximum pressure 5,8 bar.
Salt rejection:> 85%
Dimensions: 500mmx500mmx150mm.
Production of up to 110 liters / day.
Membrane 70 gpd.
It incorporates a pressure gauge.
5 stages: Filtration + UDF dechlorination + CTO dechlorination + RO membrane + GAC in-line.
Automatic operating equipment.
- Membrane accumulator, for accumulation of osmosis water. Capacity 8,5 liters at 3,5 kg/cm².
- Fully assembled. They include tubes and installation accessories.
- Maximum salinity: 2.500 mg/l
- Working pressure limits with pump: 1,0 - 3,0 bar
- Working temperature 5°C to 35°C
- The performance of the equipment is variable depending on different parameters such as pressure, temperature, salinity of the water and the state of the different elements.
- Maintenance. Change of cartridges once a year.
- It is recommended to install reverse osmosis with a pump when the pressure is less than 3 bar.
- Equipment for use only with water suitable for human consumption.
- For the correct operation of the equipment and optimal water quality, it is necessary to carry out the maintenance and periodic sanitization operations indicated in the manual.
- Reduction of salts or impurities:
Sediments
Chemical contents
95-97% Arsenic / 90-95% Bicarbonates / 50-60% Boron / 94-97% Calcium / 95-99% Chlorine
Organic material
Pesticides
90-95% Chlorides / 80-85% Nitrates / 95-97% Lead / 90-95% Sodium / 95-98% Sulfates
Note: these values are variable for each installation depending on the pressure, salinity and temperature of the supply water.
