Self-compensating insertion dripper with continuous self-cleaning, high flow HF, carpenter with hood.
APPLICATIONS:
- Irrigation in gardening and trees with wide crowns.
SPECIFICATIONS:
- Working pressure range: 1.0 to 4.0 bar.
- Recommended filtration: 130 micron / 120 mesh.
- The filtration method will be selected based on the type and concentration of existing particles in the water. In case the water contains sand in excess of 2 ppm, a hydrocyclone filter must be installed in front of the main filter. If sand/silt/clay exceeds 100ppm, pre-treatment will be applied as instructed by the Netafim team of experts.
- Very wide steps of water.
- For insertion in thick-walled pipes (0.9, 1.0 and 1.2 mm).
- Injected silicone diaphragm.
- Resistant to ultraviolet rays. Resistant to normal nutrients used in agriculture.
FEATURES AND BENEFITS:
- Auto-compensation: supplies exact and equal amounts of water in a wide range of pressures. 100% uniformity in the distribution of water and nutrients throughout the irrigators.
- Constant self-cleaning system: washes contaminants by detecting them throughout the operation, improves resistance to clogging not only at the beginning or end of a cycle, guaranteeing uninterrupted operation of the dripper.
- Wide water passages, improving resistance to clogging.
- The dripper can be placed exactly where the crop requires it.
- The number of drippers can be increased to increase the amount of water supply to meet the tree's requirements as it grows.
- It can be used as an individual product or as a flow regulator placed before another emitter.
- Allows the installation of the "spider assembly", distributing the water supply in numerous irrigation points or in conjunction with the PC Spray Stake stakes.