PRISMAB is an irrigation management system that allows the monitoring of agronomic and environmental parameters in order to optimize production, quality and environmental sustainability.
Thanks to the new technologies in IoT, the farmer or field technician can easily deploy a network of autonomous sensors that will allow him to easily cover any irrigation sector in an easy, accessible and economical way.
Among the advantages of using the PRISMAB system we highlight:
-Control leaching: During irrigation so that excess salt content that is harmful to the plant does not accumulate.
-Water in the root: Traceability of water absorption in the root of the plant can be carried out.
-Avoid percolation: Detects and prevents deep percolation, with the consequent saving of water.
-Water control at the root: Controls exactly the level of available water that the plant has or has had historically.
-Adjust watering: Adjust the upper and lower watering thresholds according to the actual water absorption of the plant.
-Monitor rainfall: Monitor the impact of rain on the plot.
-Efficient irrigation: Applies efficient irrigation techniques based on the data.
-Frost detection: Optimize the comfort of the root system and avoid damage due to low temperatures.
PRISMAB SENSOR
PRISMAB Sensor is an industrial quality measuring instrument, which performs measurements of a volume of earth around the sensor itself. This allows a measurement in orders of accuracy much higher than the rest of agricultural sensors.
The device is built to withstand harsh field conditions, inclement weather, and physical, chemical, and biological wear and tear.
By injecting current into the ground, the sensor measures the permittivity of the ground, thereby obtaining the most important parameters such as WVC (Volumetric Water Content), EC (Electroconductivity linked to the salinity of the land and water) and Temperature of the I usually.
PRISMAB Sensor uses a standard communication protocol that makes it compatible with other systems in addition to the PRISMAB system itself.
Sizes:
-Volumetric water content (%).
-Electrical conductivity (dS/m)
-Temperature (ºC)
Cable length: 2 m.
Connection: Push-Pull (waterproof)
Communication: RS232
Installation:
Drill a hole in the ground to the desired depth and insert the sensor into the ground. Refill with the extracted soil compacting at the same time.
PRISMAB LINK
PRISMAB Link is a module that allows data to be sent to the PRISMAB App. Thanks to the latest IoT technology, PRISMAB Link sends the information directly to the cloud without the need for any intermediary device.
This makes it possible to deploy a network of sensors with total independence from a hub, being able to control as many farms as necessary.
The PRISMAB Link module sends information from the sensors hourly, its battery can last up to 4 years completely autonomously with 4 AA batteries. PRISMAB Link also incorporates ambient temperature measurement.
Properties:
Protection: IP67 (waterproof) and ultraviolet radiation protection.
Connection: Push-Pull (waterproof).
Data sending frequency: 1 hour.
Ability to connect up to 3 sensors
Autonomy: up to 4 years.
Battery: 4xAA
Communication with the cloud: SigFox.
Coverage throughout the national territory.
Installation:
Fix the PRISMAB Link to any fixed area using some flanges (included in the pack) and connect the sensor (or sensors) using the push pull connection. The transmitter only sends when a sensor is connected.
PRISMAB APP
PRISMAB App is a powerful management tool that allows you to centralize information from all PRISMAB sensors and opens up a range of new possibilities for the farmer or field technician.
The farmer or technician will be able to see the most important statistics about the use of water in his production, which will help him in making decisions when establishing his irrigation strategy.
Through a real-time API, the data is compatible with third-party applications and can be easily integrated into other systems such as fertigation devices, thus being able to automate irrigation based on the real needs of the crop and not on a timer.
Properties:
-Graphic results in real time.
-Data history.
-Geolocation.
-Alerts and notifications module.
-Ability to download all the information in .xlsx format
Activation of PRISMABS Links:
To view the data of a PRISMAB Link, you just have to enter its serial number by pressing the "New device" button in the "Devices" section.
Integration with Third Party Applications (API):
-HTTP REST.
-Webhook (real time).
-WebSocket (real time).
