SENA pump
Flow (m³ / h): 14, Pressure (mca): 10, Power (CV): 1,25, Voltage (V): 230V II, Frequency (Hz): 50.
Range of new generation pumps. With powers from 1/3 CV to 1,25 CV in single-phase motors and from 3/4 CV to 1,25 CV in three-phase motors. GS marking. IP-55 motor protection, insulation. Class F, AISI-316 in all those parts in direct contact with water. Pipe connections by means of a 50 mm diameter glue sleeve. Flows in l / h at 6 mwc for 0,33 CV. 3.000 rpm.
Technical information:
- Pump screws in stainless steel.
- 1,5" suction and discharge connection fittings for Ø 50mm hose.
- Mechanical seal made of AISI 316.
- Impeller in NORYL (R).
- Pump body and diffuser made of polypropylene with mineral filler and fiberglass.
- Class F insulation and IP-55 motor protection, allowing them to work in environments with high humidity and high temperatures.
- Self-suction capacity above 2 m.
- Standard range at 50 Hz, also available at 60 Hz.
- They work at full capacity with an optimal noise level for all models, so that the noise effects perceived in the pool environment are minimised.
- It incorporates the bayonet closure in its pre-filter cover which allows the pump's pre-filter to be closed in a single movement in four different positions.
- The cross configuration of the pre-filter lid allows the use of any tool to open or close it.
