Manual ring filter RM 1.1 / 2 PQ (Chemical Products) short ARKAL.
Ring filters have the ability to filter in depth, so they are indicated for filtering problem waters or when using small pass emitters, such as drip.
The 1.1/2” T-shaped filter made entirely of plastic whose filter element is made up of a set of grooved rings that, mounted on a spine, form a cylindrical filter body. The rings are held together and compressed thanks to the force of a spring located at the bottom of the filter cover.
The filter has straight inlet and outlet connections of 1.1/2'' male thread.
They have a water pressure reading before and after the filter.
They allow their use in multiple applications such as: sprinkler, micro-sprinkler and drip irrigation installations, greenhouses, domestic or industrial water circuits, filtration of water intakes for hydraulic control systems, etc...
Cleaning is easily done manually, by removing the cap and removing the ring cartridge that will be washed with clean water under pressure.
Suitable for chemical products (PQ).
Makings:
-Body, cover and spine: polyamide reinforced with fiberglass.
-Rings: polypropylene.
-Spring: stainless steel.
-O-rings: nitrile rubber.
Features:
-Maximum pressure 10 atm
-Flow 8 m3 / h
-Filtration surface 308 cm2
-Filtration volume 370 cm2
-Filter length 250 mm
-Filter width 130 mm
-Distance between connections 200 mm
-Length of filter elements 139 mm
-Weight 1,30 kg
-Filtration degree 80 mesh 200 microns (yellow)
-Maximum head loss 8.1 mca at 8 m3 / h (100mesh).
