Automatic mesh filter MINI SIGMA angular, 2" male thread, 130 microns (120 mesh) with ADI-P control.
The Mini Sigma filter consists of a small, light, quick and easy to install filter whose handling is simple and requires low maintenance. It is designed to work at low pressure and includes a 40 mm (1 ½”) flushing valve.
It is an innovative, automatic and self-cleaning filter, which has a large filtration surface for maximum protection of any irrigation system and which highlights the following aspects:
- Made entirely of polymeric materials.
- Anti-corrosion, high durability.
- Cleaning technology by scanning and suction.
- Modular design: various installation configurations.
- Low water and energy consumption.
- Compact design and reduced occupation area.
- Easy installation and low maintenance.
- Ideal for various agricultural irrigation and landscaping applications.
- Innovative ADI-P electronic controller, operated through a mobile application to have advanced monitoring capabilities.
Operation:
The water enters the filter first passing through the coarse mesh where residual sediment is captured.
The particular and exclusive design of the coarse mesh provides a greater mesh area, increasing the capacity of the filter to handle significant loads of large particles.
The water then continues to flow through the filter and passes through the internal fine mesh where the remaining smaller particles are captured. The gradual accumulation of dirt on the inner surface of the mesh generates a differential pressure.
Características técnicas:
- Maximum flow (130µ) in medium quality water: 25 m3/h
- Minimum operating pressure during cleaning: 1.5 bar
- Maximum operating pressure: 8 bar
- Filtration surface: 1200 cm2
- Inlet / outlet diameters: 2” (50mm) BSPT/NPT
- Weight (empty): 16 kg
- Length: 1133mm
- Width: 421mm
- Union: Male thread
- Power supply: 4 AA 1,5V batteries / External 7-14V DC
- Solenoid operating data: Latch type solenoid 12-9V DC
- DP Switch: Integrated Sensors
- Standard filtration degree: 130 microns; 0,13mm
Wash data:
- Discharge valve: 1 ½” (40 mm) BSPT/NPT
- Washing time: 10 seconds
- Volume of water consumed per wash cycle: 24 liters
- Washing flow: 8,7 m3/h
ADI-P washing control system:
Controller that interacts with the App, providing detailed information regarding the filtration performance on your mobile device, through bluetooth® communication. The self-cleaning process is controlled and monitored by the ADI-P controller.
It is the only controller that identifies when a wash is complete, allowing settings to be adjusted to improve efficiency if needed.
The ADI-P controller and mobile App provide:
- Records of differential pressure and washing cycles.
- Alerts for low / high pressure and low battery.
- Reports and historical data on filter performance.
-Storage of information in offline mode.
