Enjoying our own pool in summer is a real luxury. But for this, it is not only important that the water appears clean, but that it is. To keep the water in our pool clean, many factors come into play, such as pH, water disinfection, algae prevention ... etc. Our main objective should be to achieve the perfect balance between all these factors in order to achieve an optimal result.
Sometimes, the water in our pool can turn cloudy due to various factors such as the appearance of algae, improper pH level, or poor filtration.
En Mundoriego We give you all the necessary keys to ensure that the water in your pool is perfect throughout the summer.
What should I take into account to keep the water clean
- PH adjustment: The first step to ensure that the water is in optimal conditions is to regulate the pH. The correct value should be between approximately 7,2 and 7,6. If the pH is too high, when bathing we could suffer eye or skin irritations. If the pH is below the recommended values, there will be a risk of corrosion, and we could also suffer the same symptoms as in the opposite case. To keep the pH balanced, we must use a regulator (increasing, lesser o chlorine neutralizer).
- Water disinfection: The water in our pool can become a source of microorganisms. To do this, we must maintain the water with an adequate level of disinfection. If we keep the water with a correct level of disinfection, we will also avoid the appearance of algae and a cloudy appearance. Using a desinfectant Adequate we will be able to eliminate all types of microorganisms that may appear in our pool. In addition, it is important to use quality products that prevent or eliminate the appearance of algae, such as algaecides o anti algae. Its main mission is to avoid or eliminate the appearance of algae in our pool. For more information, you can check the post How to keep your pool clean in summer with all the necessary products and tricks.
In addition to the use of chemical products, which will help us to ensure that the water in our pool remains crystal clear, there are some external elements that will also play a very important role in cleaning:
- Pool pump: The pool pump is one of the most important elements for purifying the water in any pool. Its main function is to direct all the pool water to the filter. This must retain all the suspended particles, and once the water has been purified, it will be returned to the pool.
The pool pump that we choose must be able to move all the water it contains for a perfect cleaning. Choosing the correct pump will depend on the size of the pool, its material, and the amount of water it contains. Based on this, we must choose the most appropriate one taking into account the power, the flow rate or the diameter of the filter.
- Robot Cleaners: The main function of a robot cleaner is to keep the bottom and walls of the pool clean. This will move over the entire surface and is responsible for collecting leaves, dust and all kinds of impurities that are deposited on the bottom and walls of the pool. Through aspiration, these particles are led through the robot conduit to the pool pump filter. Anyone who has a pool knows how difficult it is to keep the water in perfect condition throughout the summer. Follow our advice! At Mundoriego we have a wide variety of products such as: retention valves, reducing and regulating valve, solenoid valve o drip irrigation.
Leave your comment