There is little left until summer arrives again and to be able to enjoy the pool. But before you can take a dip you must get it ready. In Mundoriego We tell you the steps you must follow and the most appropriate products to get it to be in optimal condition.
The needs will depend on the maintenance you have had throughout the year. You have probably wondered on many occasions if it is better to keep it full throughout the year or empty it when the summer ends. This will depend on the type of pool you have, since there are two types: removable pools and built-in pools.
In the first case, it is advisable to disassemble the pool and store it once the summer season has ended and we are going to stop using it. This way we will make sure to keep it in good condition for the following season.
In the case of construction pools, or those that have large dimensions, it is preferable to leave it full throughout the year with little maintenance. In addition to avoiding a considerable waste of water year after year, we will avoid that underground pressure and low temperatures can cause damage to its surface, such as the appearance of cracks.
There are chemical products that will help you disinfect and keep your water in good condition. In addition, it is advisable to cover it with a tarp during the months in which we are not going to use it to keep the water as clean as possible.
Table of Contents
Step by step to prepare your pool in summer
Check for any kind of damage
First of all, it is important to check if the pool has any type of damage to repair it. The appearance of cracks due to the change in temperature or fallen tiles is very frequent if we have an empty pool during the winter. Therefore, it is advisable to keep it full all year round, covered with a cover and follow proper maintenance.
In the event that the pool has any damage or leakage, it will be essential to repair it before starting to use it to avoid water losses.
Clean the walls and bottom of the pool
Thoroughly cleans the surface of the pool. In the event that the pool is empty, you will need a specific descaling detergent for swimming pools and a brush to remove any type of residue.
If the pool has been full all year, it will be necessary to use a robot cleanerto be able to remove any type of dirt from the walls and surface of the pool. Through its suction system, it will transport the impurities through a conduit to the pool pump filter.
Clean the pool filters
Pool filters are a fundamental part. The filter He is in charge of cleaning and purifying the water. It performs a very important job as it filters the water to remove dirt particles. For the pool water to be clean it is important that the filter is clean as well. Therefore, it is very important to do a good maintenance periodically to keep it in perfect condition.
Products necessary for the maintenance of the pool water
To keep the water in perfect condition it is essential to use the right products. There is a wide variety of products, each of them with a purpose to achieve an optimal result.
Algicide
El algaecide It is an essential product for maintaining pool water. This product is used to prevent the appearance of algae and calcareous deposits. Another of its advantages is that it prevents the calcification of the pool filters and the corrosion of the metallic filter elements.
Algae
El anti algae It is a chemical product that serves to prevent the appearance of algae in the pool. If not used, these would spread very easily through the bottom and walls.
The appearance of algae is one of the most frequent problems on the surface of swimming pools. This is an indicator that the water treatment is not adequate.
Flocculant
El flocculant It is one of the chemicals responsible for keeping water crystal clear. This is in charge of eliminating the particles that cannot be eliminated by the filter, they are normally found in suspension. As a result, we get a totally transparent water.
Increasing-pH
The pH is a value that expresses the acidity or alkalinity of the water. This is expressed as a number, on a scale from 0 to 14, where 7 is the neutral value. Therefore, the ideal is to achieve that this value is between 7,2 and 7,6, approximately.
El pH booster It is used to balance the pH of the water within optimal values. This is essential to achieve a correct state of the water when it is below 7. Achieving a balanced pH is essential since some of the direct consequences of an incorrect pH is the appearance of discomfort in the skin of bathers, irritation in the eyes, etc.
PH miner
Like the pH booster, the pH reducer serves to achieve a balance in pH levels. However, this chemical is used in cases where the pH levels are above the recommended ones.
In addition to adjusting the pH of the pool water, it prevents the formation of calcareous deposits on the surface of the pool.
Chlorine
El chlorine It is a chemical that helps us keep the water clean, so it is important to add chlorine on a regular basis. The amount will depend on the size and amount of water in the pool.
Chlorine and bromine neutralizer
El chlorine and bromine neutralizer It is a chemical product whose purpose is to remove excess chlorine or bromine from the water. To do this, it is only necessary to dissolve the product and distribute it evenly in the water.
Find everything you need to maintain your pool in our online store www.mundoriego.es, in the section pools and not only that we have for you swimming pool cleaning products, urban gardens, dripper for urban garden, irrigation online stores.
Leave your comment